Update README.md

[RPI-PICO-I2C-LCD.git] / README.md

diff --git a/README.md b/README.md
index e52b5b8522ec1c2db62db29e24d8bf74d024e9a6..7239298e5b5f8b26257dbd58e615c7bbfdef1353 100644 (file)
--- a/README.md
+++ b/README.md
@@ -10,7 +10,7 @@ Usage:
 - Open Thonny IDE with the 3 files
 - Make pin edits or setup changes (See below for options) 
 - DO NOT EDIT FILE NAMES!
 - Open Thonny IDE with the 3 files
 - Make pin edits or setup changes (See below for options) 
 - DO NOT EDIT FILE NAMES!

-- In Thonny, go to top menu File => Save Copy => Raspberry Pi Pico and save each .py file to the board.
+- In Thonny, go to top menu File => Save Copy => Raspberry Pi Pico and save each file to the board with the same name as downloaded and with a .PY extension when saving it to the board. 

 - Switch to the pico_i2c_lcd_test.py (this is the main file) and click run. This should be able to initalize the LCD display if settings are right.
 - If you get errors, see below for a known list of errors and their fixes
 - Wiring Diagram LCD_bb.jpg! Please look here for a fritzing diagram!
 - Switch to the pico_i2c_lcd_test.py (this is the main file) and click run. This should be able to initalize the LCD display if settings are right.
 - If you get errors, see below for a known list of errors and their fixes
 - Wiring Diagram LCD_bb.jpg! Please look here for a fritzing diagram!


@@ -42,4 +42,4 @@ Errors:
 
 OSERROR : 5 (This is quite a common error, 5 means I/O error. Check Your connections. This means codes can't be sent or recieved ensure SCL and SDA are properly connected through the level translator!
 
 
 OSERROR : 5 (This is quite a common error, 5 means I/O error. Check Your connections. This means codes can't be sent or recieved ensure SCL and SDA are properly connected through the level translator!
 

-Feel to leave comments or questions and I will try to answer them as quick as possible!
+Feel to leave comments or questions / issues and I will try to answer / resolve them as quick as possible!