Update README.md

[RPI-PICO-I2C-LCD.git] / README.md

diff --git a/README.md b/README.md
index 97b2f3cb1b9f261b4fedad4e62beba1fc6736351..d405ec77a4109c2dc3f80b13b3cfa715cc24ddbe 100644 (file)
--- a/README.md
+++ b/README.md
@@ -10,7 +10,7 @@ Usage:
 - Open Thonny IDE with the 3 files
 - Make pin edits or setup changes (See below for options) 
 - DO NOT EDIT FILE NAMES!
 - Open Thonny IDE with the 3 files
 - Make pin edits or setup changes (See below for options) 
 - DO NOT EDIT FILE NAMES!

-- In Thonny, go to top menu File => Save Copy => Raspberry Pi Pico and save each .py file to the board.
+- In Thonny, go to top menu File => Save Copy => Raspberry Pi Pico and save each file to the board with the same name as downloaded and with a .PY extension when saving it to the board. 

 - Switch to the pico_i2c_lcd_test.py (this is the main file) and click run. This should be able to initalize the LCD display if settings are right.
 - If you get errors, see below for a known list of errors and their fixes
 - Wiring Diagram LCD_bb.jpg! Please look here for a fritzing diagram!
 - Switch to the pico_i2c_lcd_test.py (this is the main file) and click run. This should be able to initalize the LCD display if settings are right.
 - If you get errors, see below for a known list of errors and their fixes
 - Wiring Diagram LCD_bb.jpg! Please look here for a fritzing diagram!


@@ -43,3 +43,8 @@ Errors:
 OSERROR : 5 (This is quite a common error, 5 means I/O error. Check Your connections. This means codes can't be sent or recieved ensure SCL and SDA are properly connected through the level translator!
 
 Feel to leave comments or questions / issues and I will try to answer / resolve them as quick as possible!
 OSERROR : 5 (This is quite a common error, 5 means I/O error. Check Your connections. This means codes can't be sent or recieved ensure SCL and SDA are properly connected through the level translator!
 
 Feel to leave comments or questions / issues and I will try to answer / resolve them as quick as possible!

+
+For people wondering how to use this code, Tinkernut on Youtube created a very nice guide + some more features! https://www.youtube.com/watch?v=B8Kr_3xHjqE&t
+
+Announcements / updates:
+- Thonny library package coming soon!