Update README.md

[RPI-PICO-I2C-LCD.git] / README.md

diff --git a/README.md b/README.md
index cf37e93afca93792e7f210c08391849c3b0f9179..46e993982325215b3d0fede6a5048d2849f9d9ea 100644 (file)
--- a/README.md
+++ b/README.md
@@ -3,6 +3,8 @@ This is a project which adapts code from another user to allow usage of the PCF8
 
 Credit: https://github.com/dhylands/python_lcd/tree/master/lcd mostly to Dave Hylands for the basic api and lcd driver code.
 
+Project: Check it out for a full step-by-setp guide on Instructables: https://www.instructables.com/RPI-Pico-I2C-LCD-Control/ 
+
 This is code adaptded for micropython and the Raspberry Pi PICO specifically.
 
 Usage: 
@@ -34,16 +36,16 @@ in my case, the decimal addr. was 39 which converts to 0x27 in hex.
 - Ensure that your SCL and SDA pins are selected properly in accordance with the Pico's pin table. These connect to the low voltage side of the translator with a 3.3V Reference from the board. The high voltage side gets a 5V reference from the VBUS pin of the Pico.
 - Finally, assure the I2C_NUM_ROWS and I2C_NUM_COLS are set properly!
 
-Usage: 
-These are the python commands used in a program! (They can all be found in the lcd_api.py file with definitions to their functions)
+Functions / Usage: 
 
+These are the python commands used in a program! (They can all be found in the lcd_api.py file with definitions to their functions)
 - lcd.putstr("Text goes here!")                     - Send a string of chars to the display IMPORTANT: Use this for printing a variable: lcd.putstr(str(Variable)) [Turns variable into string] 
 - lcd.show_cursor() / lcd.hide_cursor()             - Show / Hide the cursor of the lcd (White bar)
 - lcd.blink_cursor_on() / lcd.blink_cursor_off()    - Turn on / Off the blinking cursor upon printing
 - lcd.backlight_on() / lcd.backlight_off()          - Turn on / Off backlight of the LCD (Controlled by a small transistor on the backpack)
 - lcd.display_on() / lcd.display_off()              - Turn on / Off the display (Not backlight but the entire chip)
 - lcd.clear()                                       - Clear all chars or anything written to the display
-- lcd.move_to(Row, Col)                             - Move to position based on row and col values (X, Y)
+- lcd.move_to(Col, Row)                             - Move to position based on row and col values (Y, X)
 - lcd.custom_char(Num, bytearray([HEX chars])))     - Num can be any integer 0 - 8 (Writing to CGRAM locations) merely used for numbering. The HEX chars are simply made by using this link: https://maxpromer.github.io/LCD-Character-Creator/. It will provide a string of Hex charecters which can replace the "HEX chars" in the example command.
 
 Errors:
@@ -54,5 +56,4 @@ Feel to leave comments or questions / issues and I will try to answer / resolve
 
 For people wondering how to use this code, Tinkernut on Youtube created a very nice guide + some more features! https://www.youtube.com/watch?v=B8Kr_3xHjqE&t
 
-Announcements / updates:
-- Thonny library package coming soon!
+