Update README.md

[RPI-PICO-I2C-LCD.git] / README.md

diff --git a/README.md b/README.md
index 480fbeea9cb5124699208fad675cdb9403adf099..97b2f3cb1b9f261b4fedad4e62beba1fc6736351 100644 (file)
--- a/README.md
+++ b/README.md
@@ -11,8 +11,9 @@ Usage:
 - Make pin edits or setup changes (See below for options) 
 - DO NOT EDIT FILE NAMES!
 - In Thonny, go to top menu File => Save Copy => Raspberry Pi Pico and save each .py file to the board.
-- Switch to the main.py and click run. This should be able to initalize the LCD display if settings are right.
+- Switch to the pico_i2c_lcd_test.py (this is the main file) and click run. This should be able to initalize the LCD display if settings are right.
 - If you get errors, see below for a known list of errors and their fixes
+- Wiring Diagram LCD_bb.jpg! Please look here for a fritzing diagram!
 
 Requirements:
 - 3.3 - 5V level translator. This is crucial to encure the lcd recieves the commands properly. I recommend this: https://www.adafruit.com/product/757 (Must be Bi-Directional)
@@ -41,4 +42,4 @@ Errors:
 
 OSERROR : 5 (This is quite a common error, 5 means I/O error. Check Your connections. This means codes can't be sent or recieved ensure SCL and SDA are properly connected through the level translator!
 
-Feel to leave comments or questions and I will try to answer them as quick as possible!
+Feel to leave comments or questions / issues and I will try to answer / resolve them as quick as possible!