From 0994b72e369f4e4f0823de4f3783365f6c41ab14 Mon Sep 17 00:00:00 2001
From: Tyler Peppy <61562476+T-622@users.noreply.github.com>
Date: Thu, 4 Feb 2021 08:25:56 -0500
Subject: [PATCH 1/1] Update README.md

---
 README.md | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/README.md b/README.md
index 83d281c..a04e1fd 100644
--- a/README.md
+++ b/README.md
@@ -28,7 +28,7 @@ scl=machine.Pin(1)
 i2c=machine.I2C(0,sda=sda, scl=scl, freq=400000)
 print(i2c.scan())
 
-- Once you get an address, this will be in decimal and not hex. You can convert the decimal to hex or simply put a decimal address in the setup.
+- Once you get an address through the console (REPL), this will be in decimal and not hex. You can convert the decimal to hex or simply put a decimal address in the setup.
 in my case, the decimal addr. was 39 which converts to 0x27 in hex.
 - Ensure that your SCL and SDA pins are selected properly in accordance with the Pico's pin table. These connect to the low voltage side of the translator with a 3.3V Reference from the board. The high voltage side gets a 5V reference from the VBUS pin of the Pico.
 - Finally, assure the I2C_NUM_ROWS and I2C_NUM_COLS are set properly!
-- 
2.47.3