micropython_ir projects

[micorpython_ir.git] / RECEIVER.md

diff --git a/RECEIVER.md b/RECEIVER.md
index ac20e18053898572badb6fe7eae1d0865ef06767..13ce77a24339cb1557c1e9aa5c011fe953fe7bd4 100644 (file)
--- a/RECEIVER.md
+++ b/RECEIVER.md
@@ -15,9 +15,20 @@ driver design ensures operation regardless of sense.
 In my testing a 38KHz demodulator worked with 36KHz and 40KHz remotes, but this
 is obviously neither guaranteed nor optimal.
 
 In my testing a 38KHz demodulator worked with 36KHz and 40KHz remotes, but this
 is obviously neither guaranteed nor optimal.
 

+The TSOP4838 can run from 3.3V or 5V supplies. The former should be used on
+non-5V compliant hosts such as ESP32 and Raspberry Pi Pico and is fine on 5V
+compliant hosts too.
+

 The pin used to connect the decoder chip to the target is arbitrary. The test
 The pin used to connect the decoder chip to the target is arbitrary. The test

-program assumes pin X3 on the Pyboard, pin 23 on ESP32 and pin 13 on ESP8266.
-On the WeMos D1 Mini the equivalent pin is D7.
+program `acquire.py` uses the following pins by default:
+
+| Host    | Pin | Notes |
+|:-------:|:---:|:-----:|
+| Pyboard | X3  |  |
+| ESP32   | 23  |  |
+| ESP8266 | 13  |  |
+| D1 Mini | D7  | WeMos name for pin 13. |
+| Pico    | 16  |  |

 
 A remote using the NEC protocol is [this one](https://www.adafruit.com/products/389).
 
 
 A remote using the NEC protocol is [this one](https://www.adafruit.com/products/389).
 


@@ -55,7 +66,8 @@ test()
 This script waits for a single burst from the remote and prints the timing of
 the pulses followed by its best guess at the protocol. It correctly identifies
 supported protocols, but can wrongly identify unsupported protocols. The
 This script waits for a single burst from the remote and prints the timing of
 the pulses followed by its best guess at the protocol. It correctly identifies
 supported protocols, but can wrongly identify unsupported protocols. The

-behaviour of the script exposed to an unknown protocol is unpredictable.
+report produced by the script exposed to an unknown protocol is unpredictable.
+The `test()` function returns a list of the mark and space periods (in μs).

 
 # 3. The driver
 
 
 # 3. The driver
 


@@ -129,9 +141,9 @@ Class variables:
  1. These are constants defining the NEC repeat code and the error codes sent
  to the error function. They are discussed in [section 4](./RECEIVER.md#4-errors).
 
  1. These are constants defining the NEC repeat code and the error codes sent
  to the error function. They are discussed in [section 4](./RECEIVER.md#4-errors).
 

-#### NEC classes
+#### NEC classes (includes Samsung)

 
 

-`NEC_8`, `NEC_16`
+`NEC_8`, `NEC_16`, `SAMSUNG`

 
 Typical invocation:
 ```python
 
 Typical invocation:
 ```python


@@ -145,6 +157,13 @@ The `NEC_8` class enables error checking for remotes that return an 8 bit
 address: the complement is checked and the address returned as an 8-bit value.
 A 16-bit address will result in an error.
 
 address: the complement is checked and the address returned as an 8-bit value.
 A 16-bit address will result in an error.
 

+The `SAMSUNG` class returns 16 bit address and data values. The remote sample
+tested did not issue repeat codes - if a button is held down it simply repeated
+the original value. In common with other NEC classes the callback receives a
+value of 0 in the `ctrl` arg.
+
+Thanks are due to J.E.Tannenbaum for information about the Samsung protocol.
+

 #### Sony classes
 
 `SONY_12`, `SONY_15`, `SONY_20`
 #### Sony classes
 
 `SONY_12`, `SONY_15`, `SONY_20`


@@ -280,6 +299,12 @@ CPU times used by `.decode` (not including the user callback) were measured on
 a Pyboard D SF2W at stock frequency. They were: NEC 1ms for normal data, 100μs
 for a repeat code. Philips codes: RC-5 900μs, RC-6 mode 0 5.5ms.
 
 a Pyboard D SF2W at stock frequency. They were: NEC 1ms for normal data, 100μs
 for a repeat code. Philips codes: RC-5 900μs, RC-6 mode 0 5.5ms.
 

+# 7. Unsupported protocols
+
+It is possible to capture an IR burst from a remote and to re-create it using
+the transmitter. This has limitations and is discussed in detail in
+[the transmitter doc](./TRANSMITTER.md#5-unsupported-protocols).
+

 # Appendix 1 NEC Protocol description
 
 A normal burst comprises exactly 68 edges, the exception being a repeat code
 # Appendix 1 NEC Protocol description
 
 A normal burst comprises exactly 68 edges, the exception being a repeat code