Transmitter: ESP32 uses RMT to generate carrier. Test program updated for uasyncio V3

[micorpython_ir.git] / ir_tx / test.py

diff --git a/ir_tx/test.py b/ir_tx/test.py
index b175dcd2ef8fec1a87be167140448debd5df45b4..c1961fdc4b9e1f24247e4cd8021b5f285d79dca3 100644 (file)
--- a/ir_tx/test.py
+++ b/ir_tx/test.py
@@ -1,4 +1,4 @@
-# ir_tx_test.py Test for nonblocking NEC/SONY/RC-5/RC-6 mode 0 IR blaster.
+# ir_tx.test Test for nonblocking NEC/SONY/RC-5/RC-6 mode 0 IR blaster.

 
 # Released under the MIT License (MIT). See LICENSE.
 
 
 # Released under the MIT License (MIT). See LICENSE.
 


@@ -12,7 +12,8 @@ if ESP32:
 else:
     from pyb import Pin, LED
 import uasyncio as asyncio
 else:
     from pyb import Pin, LED
 import uasyncio as asyncio

-from aswitch import Switch, Delay_ms
+from primitives.switch import Switch
+from primitives.delay_ms import Delay_ms

 # Import all implemented classes
 from ir_tx.nec import NEC
 from ir_tx.sony import SONY_12, SONY_15, SONY_20
 # Import all implemented classes
 from ir_tx.nec import NEC
 from ir_tx.sony import SONY_12, SONY_15, SONY_20


@@ -20,20 +21,24 @@ from ir_tx.philips import RC5, RC6_M0
 
 loop = asyncio.get_event_loop()
 
 
 loop = asyncio.get_event_loop()
 

+# If button is held down normal behaviour is to retransmit
+# but most NEC models send a REPEAT code

 class Rbutton:
     toggle = 1  # toggle is ignored in NEC mode
 class Rbutton:
     toggle = 1  # toggle is ignored in NEC mode

-    def __init__(self, irb, pin, addr, data, rep_code=False):
+    def __init__(self, irb, pin, addr, data, proto):

         self.irb = irb
         self.sw = Switch(pin)
         self.addr = addr
         self.data = data
         self.irb = irb
         self.sw = Switch(pin)
         self.addr = addr
         self.data = data

-        self.rep_code = rep_code
+        self.proto = proto
+

         self.sw.close_func(self.cfunc)
         self.sw.open_func(self.ofunc)
         self.tim = Delay_ms(self.repeat)
 
     def cfunc(self):  # Button push: send data
         self.sw.close_func(self.cfunc)
         self.sw.open_func(self.ofunc)
         self.tim = Delay_ms(self.repeat)
 
     def cfunc(self):  # Button push: send data

-        self.irb.transmit(self.addr, self.data, Rbutton.toggle)
+        tog = 0 if self.proto < 3 else Rbutton.toggle  # NEC, sony 12, 15: toggle==0
+        self.irb.transmit(self.addr, self.data, tog, True)  # Test validation

         # Auto repeat. The Sony protocol specifies 45ms but this is tight.
         # In 20 bit mode a data burst can be upto 39ms long.
         self.tim.trigger(108)
         # Auto repeat. The Sony protocol specifies 45ms but this is tight.
         # In 20 bit mode a data burst can be upto 39ms long.
         self.tim.trigger(108)


@@ -46,28 +51,28 @@ class Rbutton:
         await asyncio.sleep(0)  # Let timer stop before retriggering
         if not self.sw():  # Button is still pressed: retrigger
             self.tim.trigger(108)
         await asyncio.sleep(0)  # Let timer stop before retriggering
         if not self.sw():  # Button is still pressed: retrigger
             self.tim.trigger(108)

-            if self.rep_code:
+            if self.proto == 0:

                 self.irb.repeat()  # NEC special case: send REPEAT code
             else:
                 self.irb.repeat()  # NEC special case: send REPEAT code
             else:

-                self.irb.transmit(self.addr, self.data, Rbutton.toggle)
+                tog = 0 if self.proto < 3 else Rbutton.toggle  # NEC, sony 12, 15: toggle==0
+                self.irb.transmit(self.addr, self.data, tog, True)  # Test validation

 
 async def main(proto):
 
 async def main(proto):

-    # Test uses a 38KHz carrier. Some Philips systems use 36KHz.
-    # If button is held down normal behaviour is to retransmit
-    # but most NEC models send a REPEAT code
-    rep_code = proto == 0  # Rbutton constructor requires False for RC-X. NEC protocol only.
+    # Test uses a 38KHz carrier.

     if ESP32:  # Pins for IR LED gate
     if ESP32:  # Pins for IR LED gate

-        pin = (Pin(23, Pin.OUT, value = 0), Pin(21, Pin.OUT, value = 0))
+        pin = Pin(23, Pin.OUT, value = 0)

     else:
         pin = Pin('X1')
     classes = (NEC, SONY_12, SONY_15, SONY_20, RC5, RC6_M0)
     irb = classes[proto](pin, 38000)  # My decoder chip is 38KHz
     else:
         pin = Pin('X1')
     classes = (NEC, SONY_12, SONY_15, SONY_20, RC5, RC6_M0)
     irb = classes[proto](pin, 38000)  # My decoder chip is 38KHz

+    # Uncomment the following to print transmit timing
+    # irb.timeit = True

 
     b = []  # Rbutton instances
     px3 = Pin(18, Pin.IN, Pin.PULL_UP) if ESP32 else Pin('X3', Pin.IN, Pin.PULL_UP)
     px4 = Pin(19, Pin.IN, Pin.PULL_UP) if ESP32 else Pin('X4', Pin.IN, Pin.PULL_UP)
 
     b = []  # Rbutton instances
     px3 = Pin(18, Pin.IN, Pin.PULL_UP) if ESP32 else Pin('X3', Pin.IN, Pin.PULL_UP)
     px4 = Pin(19, Pin.IN, Pin.PULL_UP) if ESP32 else Pin('X4', Pin.IN, Pin.PULL_UP)

-    b.append(Rbutton(irb, px3, 0x1, 0x7, rep_code))
-    b.append(Rbutton(irb, px4, 0x10, 0xb, rep_code))
+    b.append(Rbutton(irb, px3, 0x1, 0x7, proto))
+    b.append(Rbutton(irb, px4, 0x10, 0xb, proto))

     if ESP32:
         while True:
             print('Running')
     if ESP32:
         while True:
             print('Running')


@@ -80,7 +85,7 @@ async def main(proto):
 
 # Greeting strings. Common:
 s = '''Test for IR transmitter. Run:
 
 # Greeting strings. Common:
 s = '''Test for IR transmitter. Run:

-from ir_tx_test import test
+from ir_tx.test import test

 test() for NEC protocol
 test(1) for Sony SIRC 12 bit
 test(2) for Sony SIRC 15 bit
 test() for NEC protocol
 test(1) for Sony SIRC 12 bit
 test(2) for Sony SIRC 15 bit


@@ -97,7 +102,7 @@ Ground pin X4 to send addr 0x10 data 0x0b.'''
 
 # ESP32
 sesp = '''
 
 # ESP32
 sesp = '''

-IR LED gate on pins 23, 21
+IR LED gate on pin 23

 Ground pin 18 to send addr 1 data 7
 Ground pin 19 to send addr 0x10 data 0x0b.'''
 
 Ground pin 18 to send addr 1 data 7
 Ground pin 19 to send addr 0x10 data 0x0b.'''