acquire.py script improved.

[micorpython_ir.git] / TRANSMITTER.md

diff --git a/TRANSMITTER.md b/TRANSMITTER.md
index 8a8331414ee1d726e1ddb87e1ec0b40da2ff1211..c29a0ddbd840f0a9c924cbe500ee7db3e3365629 100644 (file)
--- a/TRANSMITTER.md
+++ b/TRANSMITTER.md
@@ -37,13 +37,13 @@ which is the driver default. If using a circuit where "off" is required to be
 
 The ESP32 RMT device does not currently support the carrier option. A simple
 hardware gate is required to turn the IR LED on when both the carrier pin and
 
 The ESP32 RMT device does not currently support the carrier option. A simple
 hardware gate is required to turn the IR LED on when both the carrier pin and

-the RMT pin are high. A suitable circuit is below.  
+the RMT pin are high. A suitable circuit is below; the transistor type is not
+critical.  

 ![Image](images/gate.png)
 
 ![Image](images/gate.png)
 

-The transistor type is not critical. A gate could be built with two similarly
-connected N-channel MOSFETS. The 1KΩ resistors would not be required. The
-MOSFETS would require a low RDSon at Vgs == 3.3V. A ZVN4210A seems suitable
-but I haven't tried it.
+This simpler alternative uses MOSFETS, but the device type needs attention. The
+chosen type has a low gate-source threshold voltage and low Rdson.  
+![Image](images/gate_mosfet.png)

 
 # 2. Dependencies and installation
 
 
 # 2. Dependencies and installation
 


@@ -60,7 +60,11 @@ from [this repo](https://github.com/peterhinch/micropython-async).
 ## 2.2 Installation
 
 The transmitter is a Python package. This minimises RAM usage: applications
 ## 2.2 Installation
 
 The transmitter is a Python package. This minimises RAM usage: applications

-only import the device driver for the protocol in use.
+only import the device driver for the protocol in use. Clone the repository to
+the current directory of your PC with:
+```bash
+$ git clone https://github.com/peterhinch/micropython_ir
+```

 
 Copy the following to the target filesystem:
  1. `ir_tx` Directory and contents.
 
 Copy the following to the target filesystem:
  1. `ir_tx` Directory and contents.