X-Git-Url: https://vault307.fbx.one/gitweb/micorpython_ir.git/blobdiff_plain/2ebf5db498266618fc0f037469309a6ea1906304..9370ba45583cf7a694856721cf5e6020136505c2:/TRANSMITTER.md?ds=inline

diff --git a/TRANSMITTER.md b/TRANSMITTER.md
index 1c30d4f..a328d68 100644
--- a/TRANSMITTER.md
+++ b/TRANSMITTER.md
@@ -47,13 +47,19 @@ updated to use it. The same circuits as above may be used to connect to pin 23
 available on the ESP32 `RMT` object, so any alternative circuit must illuminate
 the LED if the pin state is high.
 
+## 1.3 RP2 Wiring
+
+There is no `active_high` option so the circuit  must illuminate the LED if the
+pin state is high, as per the above drivers. Test programs use pin 17, but this
+can be reassigned.
+
 # 2. Dependencies and installation
 
 ## 2.1 Dependencies
 
 The device driver has no dependencies.
 
-On ESP32 a firmware version >= V1.14 is required. The Loboris port is not
+On ESP32 a firmware version >= V1.17 is required. The Loboris port is not
 supported owing to the need for the RMT device and other issues.
 
 The demo program uses `uasyncio` primitives from