X-Git-Url: https://vault307.fbx.one/gitweb/micorpython_ir.git/blobdiff_plain/3bc46448ddca0bfdf3a98d96c3e9315159bf642b..3b6cfaf15ad930c34b0d7f87c6a841ea651ccccb:/ir_rx/philips.py?ds=sidebyside

diff --git a/ir_rx/philips.py b/ir_rx/philips.py
new file mode 100644
index 0000000..cbd96f8
--- /dev/null
+++ b/ir_rx/philips.py
@@ -0,0 +1,127 @@
+# philips.py Decoder for IR remote control using synchronous code
+# Supports Philips RC-5 RC-6 mode 0 protocols.
+
+# Author: Peter Hinch
+# Copyright Peter Hinch 2020 Released under the MIT license
+
+from utime import ticks_us, ticks_diff
+from ir_rx import IR_RX
+
+class RC5_IR(IR_RX):
+    def __init__(self, pin, callback, *args):
+        # Block lasts <= 30ms and has <= 28 edges
+        super().__init__(pin, 28, 30, callback, *args)
+
+    def decode(self, _):
+        try:
+            nedges = self.edge  # No. of edges detected
+            if not 14 <= nedges <= 28:
+                raise RuntimeError(self.OVERRUN if nedges > 28 else self.BADSTART)
+            # Regenerate bitstream
+            bits = 0
+            bit = 1
+            for x in range(1, nedges):
+                width = ticks_diff(self._times[x], self._times[x - 1])
+                if not 500 < width < 2000:
+                    raise RuntimeError(self.BADBLOCK)
+                for _ in range(1 if width < 1334 else 2):
+                    bits <<= 1
+                    bits |= bit
+                bit ^= 1
+            self.verbose and print(bin(bits))  # Matches inverted scope waveform
+            # Decode Manchester code
+            x = 30
+            while not bits >> x:
+                x -= 1
+            m0 = 1 << x  # Mask MS two bits (always 01)
+            m1 = m0 << 1
+            v = 0  # 14 bit bitstream
+            for _ in range(14):
+                v <<= 1
+                b0 = (bits & m0) > 0
+                b1 = (bits & m1) > 0
+                if b0 == b1:
+                    raise RuntimeError(self.BADBLOCK)
+                v |= b0
+                m0 >>= 2
+                m1 >>= 2
+            # Split into fields (val, addr, ctrl)
+            val = (v & 0x3f) | (0x40 if ((v >> 12) & 1) else 0)
+            addr = (v >> 6) & 0x1f
+            ctrl = (v >> 11) & 1
+
+        except RuntimeError as e:
+            val, addr, ctrl = e.args[0], 0, 0
+        # Set up for new data burst and run user callback
+        self.do_callback(val, addr, ctrl)
+
+class RC6_M0(IR_RX):
+    # Even on Pyboard D the 444μs nominal pulses can be recorded as up to 705μs
+    # Scope shows 360-520 μs (-84μs +76μs relative to nominal)
+    # Header nominal 2666, 889, 444, 889, 444, 444, 444, 444 carrier ON at end
+    hdr = ((1800, 4000), (593, 1333), (222, 750), (593, 1333), (222, 750), (222, 750), (222, 750), (222, 750))
+    def __init__(self, pin, callback, *args):
+        # Block lasts 23ms nominal and has <=44 edges
+        super().__init__(pin, 44, 30, callback, *args)
+
+    def decode(self, _):
+        try:
+            nedges = self.edge  # No. of edges detected
+            if not 22 <= nedges <= 44:
+                raise RuntimeError(self.OVERRUN if nedges > 28 else self.BADSTART)
+            for x, lims in enumerate(self.hdr):
+                width = ticks_diff(self._times[x + 1], self._times[x])
+                if not (lims[0] < width < lims[1]):
+                    self.verbose and print('Bad start', x, width, lims)
+                    raise RuntimeError(self.BADSTART)
+            x += 1
+            width = ticks_diff(self._times[x + 1], self._times[x])
+            # 2nd bit of last 0 is 444μs (0) or 1333μs (1)
+            if not 222 < width < 1555:
+                self.verbose and print('Bad block 1 Width', width, 'x', x)
+                raise RuntimeError(self.BADBLOCK)
+            short = width < 889
+            v = int(not short)
+            bit = v
+            bits = 1  # Bits decoded
+            x += 1 + int(short)
+            width = ticks_diff(self._times[x + 1], self._times[x])
+            if not 222 < width < 1555:
+                self.verbose and print('Bad block 2 Width', width, 'x', x)
+                raise RuntimeError(self.BADBLOCK)
+            short = width < 1111
+            if not short:
+                bit ^= 1
+            x += 1 + int(short)  # If it's short, we know width of next
+            v <<= 1
+            v |= bit  # MSB of result
+            bits += 1
+            # Decode bitstream
+            while bits < 17:
+                # -1 convert count to index, -1 because we look ahead
+                if x > nedges - 2:
+                    raise RuntimeError(self.BADBLOCK)
+                # width is 444/889 nominal
+                width = ticks_diff(self._times[x + 1], self._times[x])
+                if not 222 < width < 1111:
+                    self.verbose and print('Bad block 3 Width', width, 'x', x)
+                    raise RuntimeError(self.BADBLOCK)
+                short = width < 666
+                if not short:
+                    bit ^= 1
+                v <<= 1
+                v |= bit
+                bits += 1
+                x += 1 + int(short)
+
+            if self.verbose:
+                 ss = '20-bit format {:020b} x={} nedges={} bits={}'
+                 print(ss.format(v, x, nedges, bits))
+
+            val = v & 0xff
+            addr = (v >> 8) & 0xff
+            ctrl = (v >> 16) & 1
+        except RuntimeError as e:
+            val, addr, ctrl = e.args[0], 0, 0
+        # Set up for new data burst and run user callback
+        self.do_callback(val, addr, ctrl)