X-Git-Url: https://vault307.fbx.one/gitweb/micorpython_ir.git/blobdiff_plain/d8d6758c3370f4adc636aed7b935a492754f6062..146e7a81c29ff28c5c81998b52eccb0d23582799:/ir_tx/test.py?ds=sidebyside

diff --git a/ir_tx/test.py b/ir_tx/test.py
index b175dcd..c9e3366 100644
--- a/ir_tx/test.py
+++ b/ir_tx/test.py
@@ -1,4 +1,4 @@
-# ir_tx_test.py Test for nonblocking NEC/SONY/RC-5/RC-6 mode 0 IR blaster.
+# ir_tx.test Test for nonblocking NEC/SONY/RC-5/RC-6 mode 0 IR blaster.
 
 # Released under the MIT License (MIT). See LICENSE.
 
@@ -7,12 +7,15 @@
 # Implements a 2-button remote control on a Pyboard with auto repeat.
 from sys import platform
 ESP32 = platform == 'esp32'
-if ESP32:
+RP2 = platform == 'rp2'
+PYBOARD = platform == 'pyboard'
+if ESP32 or RP2:
     from machine import Pin
 else:
     from pyb import Pin, LED
 import uasyncio as asyncio
-from aswitch import Switch, Delay_ms
+from primitives.switch import Switch
+from primitives.delay_ms import Delay_ms
 # Import all implemented classes
 from ir_tx.nec import NEC
 from ir_tx.sony import SONY_12, SONY_15, SONY_20
@@ -20,20 +23,24 @@ from ir_tx.philips import RC5, RC6_M0
 
 loop = asyncio.get_event_loop()
 
+# If button is held down normal behaviour is to retransmit
+# but most NEC models send a REPEAT code
 class Rbutton:
     toggle = 1  # toggle is ignored in NEC mode
-    def __init__(self, irb, pin, addr, data, rep_code=False):
+    def __init__(self, irb, pin, addr, data, proto):
         self.irb = irb
         self.sw = Switch(pin)
         self.addr = addr
         self.data = data
-        self.rep_code = rep_code
+        self.proto = proto
+
         self.sw.close_func(self.cfunc)
         self.sw.open_func(self.ofunc)
         self.tim = Delay_ms(self.repeat)
 
     def cfunc(self):  # Button push: send data
-        self.irb.transmit(self.addr, self.data, Rbutton.toggle)
+        tog = 0 if self.proto < 3 else Rbutton.toggle  # NEC, sony 12, 15: toggle==0
+        self.irb.transmit(self.addr, self.data, tog, True)  # Test validation
         # Auto repeat. The Sony protocol specifies 45ms but this is tight.
         # In 20 bit mode a data burst can be upto 39ms long.
         self.tim.trigger(108)
@@ -46,32 +53,39 @@ class Rbutton:
         await asyncio.sleep(0)  # Let timer stop before retriggering
         if not self.sw():  # Button is still pressed: retrigger
             self.tim.trigger(108)
-            if self.rep_code:
+            if self.proto == 0:
                 self.irb.repeat()  # NEC special case: send REPEAT code
             else:
-                self.irb.transmit(self.addr, self.data, Rbutton.toggle)
+                tog = 0 if self.proto < 3 else Rbutton.toggle  # NEC, sony 12, 15: toggle==0
+                self.irb.transmit(self.addr, self.data, tog, True)  # Test validation
 
 async def main(proto):
-    # Test uses a 38KHz carrier. Some Philips systems use 36KHz.
-    # If button is held down normal behaviour is to retransmit
-    # but most NEC models send a REPEAT code
-    rep_code = proto == 0  # Rbutton constructor requires False for RC-X. NEC protocol only.
+    # Test uses a 38KHz carrier.
     if ESP32:  # Pins for IR LED gate
-        pin = (Pin(23, Pin.OUT, value = 0), Pin(21, Pin.OUT, value = 0))
+        pin = Pin(23, Pin.OUT, value = 0)
+    elif RP2:
+        pin = Pin(17, Pin.OUT, value = 0)
     else:
         pin = Pin('X1')
     classes = (NEC, SONY_12, SONY_15, SONY_20, RC5, RC6_M0)
     irb = classes[proto](pin, 38000)  # My decoder chip is 38KHz
+    # Uncomment the following to print transmit timing
+    # irb.timeit = True
 
     b = []  # Rbutton instances
-    px3 = Pin(18, Pin.IN, Pin.PULL_UP) if ESP32 else Pin('X3', Pin.IN, Pin.PULL_UP)
-    px4 = Pin(19, Pin.IN, Pin.PULL_UP) if ESP32 else Pin('X4', Pin.IN, Pin.PULL_UP)
-    b.append(Rbutton(irb, px3, 0x1, 0x7, rep_code))
-    b.append(Rbutton(irb, px4, 0x10, 0xb, rep_code))
+    px3 = Pin('X3', Pin.IN, Pin.PULL_UP) if PYBOARD else Pin(18, Pin.IN, Pin.PULL_UP)
+    px4 = Pin('X4', Pin.IN, Pin.PULL_UP) if PYBOARD else Pin(19, Pin.IN, Pin.PULL_UP)
+    b.append(Rbutton(irb, px3, 0x1, 0x7, proto))
+    b.append(Rbutton(irb, px4, 0x10, 0xb, proto))
     if ESP32:
         while True:
             print('Running')
             await asyncio.sleep(5)
+    elif RP2:
+        led = Pin(25, Pin.OUT)
+        while True:
+            await asyncio.sleep_ms(500)  # Obligatory flashing LED.
+            led(not led())
     else:
         led = LED(1)
         while True:
@@ -80,7 +94,7 @@ async def main(proto):
 
 # Greeting strings. Common:
 s = '''Test for IR transmitter. Run:
-from ir_tx_test import test
+from ir_tx.test import test
 test() for NEC protocol
 test(1) for Sony SIRC 12 bit
 test(2) for Sony SIRC 15 bit
@@ -97,11 +111,22 @@ Ground pin X4 to send addr 0x10 data 0x0b.'''
 
 # ESP32
 sesp = '''
-IR LED gate on pins 23, 21
+IR LED gate on pin 23
 Ground pin 18 to send addr 1 data 7
 Ground pin 19 to send addr 0x10 data 0x0b.'''
 
-print(''.join((s, sesp)) if ESP32 else ''.join((s, spb)))
+# RP2
+srp2 = '''
+IR LED gate on pin 17
+Ground pin 18 to send addr 1 data 7
+Ground pin 19 to send addr 0x10 data 0x0b.'''
+
+if ESP32:
+    print(''.join((s, sesp)))
+elif RP2:
+    print(''.join((s, srp2)))
+else:
+    print(''.join((s, spb)))
 
 def test(proto=0):
     loop.run_until_complete(main(proto))