From: Peter Hinch <peter@hinch.me.uk>
Date: Sun, 5 Jun 2022 16:51:45 +0000 (+0100)
Subject: Fix issue 14 NEC transmit error on RP2.
X-Git-Url: https://vault307.fbx.one/gitweb/micorpython_ir.git/commitdiff_plain/8a8fc29645419e7830d9709b8aad9787576821e2

Fix issue 14 NEC transmit error on RP2.
---

diff --git a/ir_tx/__init__.py b/ir_tx/__init__.py
index a774bad..e791b4a 100644
--- a/ir_tx/__init__.py
+++ b/ir_tx/__init__.py
@@ -46,6 +46,7 @@ class IR:
             # 1μs resolution
         elif RP2:  # PIO-based RMT-like device
             self._rmt = RP2_RMT(pin_pulse=None, carrier=(pin, cfreq, duty))  # 1μs resolution
+            asize += 1  # Allow for possible extra space pulse
         else:  # Pyboard
             if not IR._active_high:
                 duty = 100 - duty
diff --git a/ir_tx/rp2_rmt.py b/ir_tx/rp2_rmt.py
index 7b42fa8..2848419 100644
--- a/ir_tx/rp2_rmt.py
+++ b/ir_tx/rp2_rmt.py
@@ -82,10 +82,13 @@ class RP2_RMT:
             if d == 0:
                 break
         if check:
-            # Discard any trailing mark which would leave carrier on.
+            # Pulse train must end with a space otherwise we leave carrier on.
+            # So, if it ends with a mark, append a space. Note __init__.py
+            # ensures that there is room in array.
             if (x & 1):
-                x -= 1
-                ar[x] = 0
+                ar[x] = 1  # space. Duration doesn't matter.
+                x += 1
+                ar[x] = 0  # STOP
         self.icm = x  # index of 1st STOP
         mv = memoryview(ar)
         n = min(x, 4)  # Fill FIFO if there are enough data points.